NFC module
Table 6-3 NFC module description and part number
Description Spare part number
NFC module (includes cables) L56453-001
Before removing the NFC module, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 42).
2. Remove the bottom cover (see Bottom cover on page 31).
3. Remove the battery (see Battery on page 33).
Remove the NFC module:
1. Disconnect the TouchPad cable from the ZIF connector on the NFC module (1).
2. Disconnect the card reader board cable from the ZIF connector on the NFC module (2).
3. Remove the NFC module from the computer (3).
Reverse this procedure to install the NFC module.
46 Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
