Locating the mobility head unit power button
The power button is located on the top left edge of the bezel.
Locating the I/O connectivity base power button
The I/O connectivity base power button is located on the underside of the I/O connectivity base.
The mobility head unit controls the I/O connectivity base. When the mobility head unit is turned o, the I/O
connectivity base is turned o and power is available only from the I/O connectivity base’s USB Type-C port
that connects to the mobility head unit. That port remains powered so that it can continue to communicate
with the mobility head unit and allow the I/O connectivity base to turn back on when the mobility head unit is
turned on.
After the system has been turned o, you can press the power button on the underside of the I/O connectivity
base to allow power to be available on the I/O connectivity base ports while the mobility head unit remains
turned o.
Locating the mobility head unit power button 7
To Next Page
Loading...
Need help?
General
