HP Engage Go Mobile System - Installing a Security Cable Lock on the HP Engage Go Convertible System Column

Installing a security cable lock on the HP Engage Go Convertible
System column
You can secure the I/O connectivity base to a xed object with an optional security cable lock and an optional
security cable extension available from HP.
NOTE: The security cable lock and security cable extension are sold separately as an aftermarket option kit
only.
1. Remove the screw from the bottom of the column (1).
2. Attach the security cable extension to the bottom of the column using the tamper-resistant screw (2)
included with the security cable extension.
3. Secure the other end of the security cable extension with a security cable lock (3), and then lock it in
place with the key.
32 Chapter 3 Hardware congurations and upgrades