HP ENVY 14

3.
Remove the speakers (3).
Reverse this procedure to install the speakers.
Display assembly
NOTE: The display assembly spare part kit includes a display panel cable, webcam/microphone
module and cable, 2 WLAN antenna cables and transceivers,and 2 WWAN antenna cables and
transceivers.
Description Spare part number
14.5-in, LED, HD, AntiGlare, flush glass SVA display assembly for use only on Beats Edition
computer models
619399-001
14.5-in, LED, HD, AntiGlare, flush glass SVA display assembly for use only on standard computer
models
616270-001
14.5-in, LED, HD+, AntiGlare, flush glass WVA display assembly for use only on standard computer
models
608366-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery cover and battery (see
Battery on page 37).
ENWW
Component replacement procedures
75