Right side
Table 2-1 Right-side components and their descriptions
Component Description
(1) Memory card reader Reads optional memory cards that enable you to store, manage,
share, or access information.
To insert a card:
1. Hold the card label-side up, with connectors facing
the computer.
2. Insert the card into the memory card reader, and then press in
on the card until it is rmly seated.
To remove a card:
▲ Press in on the card, and then remove it from the memory
card reader.
(2) USB SuperSpeed port with HP Sleep
and Charge
Connects a USB device, provides high-speed data transfer, and even
when the computer is o, charges most products such as a cell
phone, camera, activity tracker, or smartwatch.
(3) AC adapter and battery light ● White: The AC adapter is connected and the battery is
fully charged.
● Blinking white (select products only): The AC adapter is
disconnected and the battery has reached a low battery level.
● Amber: The AC adapter is connected and the battery
is charging.
● O: The battery is not charging.
(4) Power connector Connects an AC adapter.
Right side 5
To Next Page
Loading...
