Speakers
Table 5-7 Speakers spare part information
Description Spare part number
Speakers (include left and right speakers, cables, and 2 rubber isolators) L94513-001
Before removing the speaker, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 30).
5. Remove the battery (see Battery on page 33).
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Release the tape tabs (2) that secure the speaker cables to the keyboard/top cover.
3. Remove the four Phillips M2.0×2.3 broad head screws (3) that secure the speakers to the keyboard/
top cover.
Component replacement procedures 53
To Next Page
Loading...
