Left side
Component Description
(1)
Power button
●
When the computer is off, press the button to turn on the
computer.
●
When the computer is on, press the button briefly to initiate Sleep.
●
When the computer is in the Sleep state, press the button briefly
to exit Sleep.
●
When the computer is in Hibernation, press the button briefly to
exit Hibernation.
CAUTION: Pressing and holding down the power button will result in
the loss of unsaved information.
If the computer has stopped responding and Windows shutdown
procedures are ineffective, press and hold the power button down for at
least 5 seconds to turn off the computer.
To learn more about your power settings, see your power options. From
the Start screen, type power, select Power and sleep settings, and
then select Power and sleep from the list of applications.
(2) Vent Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool internal
components and prevent overheating. It is normal for the internal fan to
cycle on and off during routine operation.
(3)
USB 2.0 port Connects an optional USB device, such as a keyboard, mouse, external
drive, printer, scanner or USB hub.
(4)
Audio-out (headphone)/Audio-in
(microphone) jack
Connects optional powered stereo speakers, headphones, earbuds, a
headset, or a television audio cable. Also connects an optional headset
microphone. This jack does not support optional microphone-only
devices.
WARNING! To reduce the risk of personal injury, adjust the volume
before putting on headphones, earbuds, or a headset. For additional
safety information, refer to the Regulatory, Safety, and Environmental
Notices. To access this guide, from the Start screen, type support, and
then select the HP Support Assistant app.
NOTE: When a device is connected to the jack, the computer speakers
are disabled.
NOTE: Be sure that the device cable has a 4-conductor connector that
supports both audio-out (headphone) and audio-in (microphone).
(5) Volume button Controls speaker volume on the tablet.
4 Chapter 2 External component identification
To Next Page
Loading...
