Power connector cable
Description Spare part number
Power connector cable 768012-001
Before removing the power connector cable, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the top cover (see
Top cover on page 28).
5. Disconnect the battery.
6. Remove the display (see Display assembly on page 53).
Remove the power connector cable:
1. Disconnect the power connector cable (1) from the system board.
Component replacement procedures 59
To Next Page
Loading...
