HP4402.book : chapter3.fm 11 Tue Apr 22 15:20:23 1997
Menu Reference
Front Panel Menu Reference "Frequency/Cal Fac" Menu
HP EPM-441A User’s Guide 3-11
•
Press this softkey to enter the measurement calibration factor for
channel A in the range of 1% to 150%. The default value is 100%.
Use the , , and hardkeys to change the
calibration factor. To confirm your choice press . Entering a
calibration factor using this softkey is only possible when you are
using an HP 8480 series power sensor.
Cal Fac
%
To Next Page
Loading...
