HP EPM-441A - Page 85

HP4402.book : chapter2.fm 45 Tue Apr 22 15:20:23 1997
Power Meter Operation
Presetting the Power Meter
HP EPM-441A User’s Guide 2-45
• is not affected.
• is set to “On”.
• is set to “AUTO”.
• is set to “Off”.
• is set to 1.000%.
• is set to “Off”.
• is set to 0 dB.
• is set to “AUTO”.
• is set to 20.000 dBm ( ) and -70.000 dBm ( ).
• is set to “Off”.
• is set to “Off”.
• is set to 20.000 dBm ( ) and
-70.000 dBm ( ).
• is set to “Off”.
• is set to 100%.
System
Inputs
Table Off/On
Filter Off/On
Filter
Duty Cycle Off/On
Duty Cycle
Offset Off/On
Offset
Range
Limits Max Min
Limits Off/On
Power Ref Off/On
Recorder Output Max Power
Min Power
Output Off/On
Zero
Cal
Ref CF