Hardware Reference Guide 2–11
Hardware Upgrades
Removing the Expansion Card Cage
To remove the expansion card cage:
1. If you have locked the Smart Cover Lock, use Computer Setup to
unlock the lock.
2. Turn off the computer and any external devices.
3. Disconnect the power cord from the power outlet, and
disconnect any external devices that are connected to the
expansion card cage.
4. Remove the computer cover.
5. Disconnect all cables attached to the expansion cards.
6. Pull the expansion card cage straight up to remove it from the
chassis.
Removing the Expansion Card Cage
✎
When reinstalling the expansion card cage, ensure that the tab on the
brace latches into the slot on the side of the power supply.
243849-003.book Page 11 Thursday, March 14, 2002 5:07 PM
To Next Page
Loading...
