Hardware Reference Guide 2–23
Hardware Upgrades
4. Raise the easy access drive bay to the upright position and
connect the flat ribbon cable and audio cable to the system board.
Connecting the Flat Ribbon Cable and Audio Cable
5. Connect the power cable 1, flat ribbon cable 2, and audio cable
3 to the rear of the optical drive.
6. Return the easy access drive bay to the normal position.
Connecting the Flat Ribbon, Audio, and Power Cables to the
Optical Drive
243849-003.book Page 23 Thursday, March 14, 2002 5:07 PM
To Next Page
Loading...
