NOTE: Option kits include more detailed installation instructions.
8. Replace the side access panel and metal side cover. See Removing and Replacing the Side
Access Panel and Metal Side Cover on page 12.
9. Replace the secure USB compartment cover. See
Removing and Replacing the Secure USB
Compartment Cover on page 10.
10. Reconnect any external devices and power cords.
11. Turn on the monitor, the thin client, and any devices you want to test.
12. Load any necessary drivers.
NOTE: You can download select hardware drivers from HP. Go to http://www.hp.com and
search for your specific thin client model.
13. Reconfigure the thin client, if necessary.
General Hardware Installation Sequence 7
To Next Page
Loading...
