HP f10

D FTP Update
HP FTP Image Update Client is a utility that allows image update from an FTP share to an HP thin
client system running the Windows Embedded Standard (WES) operating system.
FTP Image Update is only provided on the t5570 WES image.
For FTP Image Update to function properly, it requires the following available free space on the client:
● Approximately 200MB of flash
●
Approximately 250MB of RAM
FTP Image Update over wireless is not supported
For greater usage flexibility and to take advantage of all the features provided in the latest image, HP
recommends at least:
●
1 GB of flash
●
1 GB of RAM
Server Requirements
DCHP Server
Option 137 should contain a string value specifying an FTP share where the XPe images and WinPE
image are stored.
For example, if the XPe images and WinPE image are stored in ftp://ftpserver/ftpfolder, then the
option DHCP option 137 should contain the following string:
●
ftp://username:password@ftpserver/ftpfolder, if the FTP share is protected
– or –
●
ftp://ftpserver/ftpfolder, if the FTP share allows anonymous access
FTP Server
The XPe images (in .IBR format) and the WinPE image provided by HP must reside in the same
folder on the FTP server.
56 Appendix D FTP Update