HP HP-16C - Programmed Solutions

12 The HP-16C: A Quick Look
To Compute Keystrokes Display
(floating-point decimal) (f][FLOAT]4 0.0000
—49+6 4.9 (CHS][ENTER]6[%] -0.8167
V60 60(9](z 7.7460
Programmed Solutions
Writing a Program. The HP-16C is keystroke-programmable:
you can program it simply by recording the same keystrokes you
use to evaluate a problem manually.
Example: Write an iterative pro-
gram that adds 1 continually to a
given number.
Keystrokes Display*
(9] 000- Sets calculator to
Program mode (PRGM
annunciator on). Line
000.
CLEAR 000- Clears program memory.
(g][LBL]A 001-43,22, A Assigns this program
label “A”.
1 002- 1 Line002: 1.
003- 40 Line003: adds 1 to
whatever is in display
when program is run.
(fJSHOW 004- 4226 Momentarily pauses and
displays binary result.
(GTOJA 005- 22 A Continues executionin a
loop.
*The display includes line numbers and keycodes. Keycodes are two-digit numbers that
indicate the row and column position of the key(s) pressed.