Removal and replacement procedures 27
c.
Lift the access panel away from the chassis.
To replace the component, reverse the removal procedure.
PCI air baffle
To remove the component:
1. Power down the server (on page 24).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Unlock the front bezel (on page 25).
4. Place the server on its side.
5. Remove the access panel ("Access panel" on page 26).
CAUTION: For proper cooling do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed.
6. Remove the PCI air baffle.
To Next Page
Loading...
