EasyManua.ls Logo

HP HPE ProLiant ML350e Gen8 - Specifications; Environmental Specifications; Server Specifications; Power Supply Specifications

HP HPE ProLiant ML350e Gen8
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications 85
Specifications
Environmental specifications
Specification
Value
Temperature range*
Operating
10°C to 35°C (50°F to 95°F)
Non-operating
-30°C to 60°C (-22°F to 140°F)
Relative humidity
(non-condensing)
Operating, maximum wet bulb
temperature of 28°C (82.4°F)
10% to 90%
Non-operating, maximum wet
bulb temperature of 38.7°C
(101.7°F)
5% to 95%
* All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F per 1,000 ft) to 3048
m (10,000 ft) is applicable. No direct sunlight allowed.
Server specifications
Specification Value
Dimensions (with feet/bezel)
Height
43 cm (16.93 in)
Depth
63 cm (24.80 in)
Width
20 cm (7.87 in)
Weight (approximate)
Maximum (all hard drives, power
supplies, and processors installed)
27 kg (59.53 lbs)
Minimum (one hard drive, power
supply, and processor installed)
20 kg (44.09 lbs)
Power supply specifications
Depending on installed options, the server is configured with one of the following power supplies:
HPE ProLiant 460 W non-hot-plug power supply
Specification Value
Input requirements
Rated input voltage
100 to 240 V AC
Rated input frequency
50 Hz to 60 Hz
Rated input current
6 A to 3 A
Rated input power
590 W at 115 V AC input
570 W at 230 V AC input

Table of Contents

Related product manuals