Removal and replacement procedures 50
14.
Open each of the processor locking levers in the order indicated, and then open the processor
retaining bracket.
15. Remove the processor from the processor retaining bracket.
CAUTION: To avoid damage to the processor, do not touch the bottom of the processor,
especially the contact area.
CAUTION: To avoid damage to the system board:
• Do not touch the processor socket contacts.
• Always install the processor socket cover after removing the processor from the socket.
• Do not tilt or slide the processor when lowering the processor into the socket.
CAUTION: Removal of the processor or heatsink renders the thermal layer between the
processor and heatsink useless. Clean the component with the provided alcohol swab, then
add thermal grease.
16. Place the processor on a static-dissipating work surface or inside an anti-static bag.
To Next Page
Loading...
