Server troubleshooting
This section contains the following topics:
• Diagnostic indicators on page 21
• Drive monitoring on page 22
• Power supply monitoring on page 26
• Accelerator card monitoring on page 26
• Network interface monitoring on page 28
You can use the diagnostic indicators and LEDs to identify problems with the server hardware. For assistance with resolving
hardware problems, such as a component failing, contact Customer Support (https://www.hpe.com/support/hpesc).
Diagnostic indicators
The right side of the front panel on an HPE SimpliVity 380 server provides diagnostic LEDs that indicate when the server is
functioning properly and when a hardware-related error occurs. The indicators can help you correct problems before they
affect service levels.
HPE SimpliVity 380 Gen10 and HPE SimpliVity 380 Gen10 H (LFF) diagnostic indicators:
StateLEDFunctionCallout
No powerOffPower1
The server is powered upSteady green
Performing power up se-
quence
Flashing green
Server troubleshooting 21
To Next Page
Loading...
