Component identification
This section contains the following topics:
• Server components on page 5
• Specifications on page 11
• Component upgrades on page 12
• Firmware revisions on page 12
This section provides an overview of the HPE SimpliVity 380 server (components and specifications) configured for deployment
into an HPE OmniStack federation.
For complete information about the server, refer to the HPE SimpliVity 380 documentation included with your server or
available from the Customer Support (https://www.hpe.com/support/hpesc) website.
Server components
HPE SimpliVity 380 server models are available in various configurations based on storage capacity. See the QuickSpecs for
detailed system configuration options.
Intel Xeon Scalable processorsModelProcessor
1 or 2Processor count
Drive size and number per platform configuration:
• Extra Small - 5 x 960 GB SSD
• Small - 5 x 1.92 TB SSD
• Medium - 9 x 1.92 TB SSD
• Large - 12 x 1.92 TB SSD
• Extra Large – 12 x 3.84 TB SSD (4000 Series only)
• HPE SimpliVity 380 Gen10 G family:
• HPE SimpliVity 380 Gen10 G 7.5TB: 6 x 1.92 TB SSD
• HPE SimpliVity 380 Gen10 G 10TB: 8 x 1.92 TB SSD
• HPE SimpliVity 380 Gen10 G 15TB: 12 x 1.92 TB SSD
• HPE SimpliVity 380 Gen10 G 21TB: 16 x 1.92 TB SSD
• HPE SimpliVity 380 Gen10 H family. This family provides both large form factor
(LFF) and small form factor (SFF) systems:
• HPE SimpliVity 380 Gen10 H LFF 25TB: 8 x 4 TB HDD and 4 x 1.92 TB
SSD
• HPE SimpliVity 380 Gen10 H SFF 20TB: 20 x 1.2 TB HDD and 4 x 1.92 TB
SSD
Platform drive configuration
2.5" small form factor (SFF)
3.5" large form factor (Gen10 H LFF)
Drive form factor
Component identification 5
To Next Page
Loading...
