HP Integrity MC990 X - Technical Specifications and Pinouts; Integrity MC990 X System Specifications; Integrity MC990 X System Physical Specifications

Technical specifications and pinouts
This appendix contains technical specification information about your system, as follows:
•
Integrity MC990 X system specifications on page 57
• Integrity MC990 X system physical specifications on page 57
• Integrity MC990 X system environmental specifications on page 58
• Integrity MC990 X system electrical specifications on page 59
• I/O port specifications on page 60
Integrity MC990 X system specifications
Integrity MC990 X system configuration ranges summarizes the Integrity MC990 X system
configuration ranges. Note that while each MC990 X server chassis motherboard houses four processor
sockets; each socket holds multiple processor cores. The number of cores supported will change based
on customer selection and processor availability.
Table 4: Integrity MC990 X system configuration ranges
Category Minimum Maximum
Processors per server chassis 4 processors (1 motherboard)
1
4 processors
Cores per Processor 4 18
Server chassis 1 per system 8 per system
Motherboards 1 per server 1 per server
Memory risers on motherboard 2 per motherboard 8 per motherboard
Motherboard DIMM capacity 32 DIMMs per board 96 DIMMs per board
Memory capacity per DIMM 8GB 32GB
RMC units 1 per system 1 per system
Number of BaseIO riser boards One per SSI One per SSI
1
The quad-socket MC990 X server chassis motherboard supports 4 processors using multi-processor
cores.
Integrity MC990 X system physical specifications
MC990 X server chassis and 42U rack physical specifications shows the physical specifications of
the rack-mounted Integrity MC990 X system.
Technical specifications and pinouts 57