Feature Specification
Voltage 180-264 VAC (North America)
312-457 VAC (International)
Frequency 50-60 Hz
Total harmonic distortion Less than 10% at full load
The Integrity MC990 X system RMC power and technical specifications are provided in RMC
specifications.
Table 8: RMC specifications
Feature Specification
Height 1.72 inches (44 mm)
Width 17.2 inches (43.7 cm)
Depth 29.84 inches (75.8 cm)
Weight 20 lb. (9.1 kg)
RMC power supply Two per RMC
RMC power cords Two 8-ft (2.4 m) drop cables
RMC power requirements
Voltage 100-120V (90-132 VAC min/max)
200-240V (180-264 VAC min/max)
Frequency 50-60 Hz (47-63 Hz min/max)
Power (50W) per supply
Hold-up time 20 ms
Air flow (front to back) Maximum = 35 CFM (60 m3) per hour
Acoustical noise Approximately 68 dBA
Heat dissipation to air Approximately 171 BTU (0.02 tons) per hour
I/O port specifications
This section contains specifications and port pinout information for the base I/O ports of your system, as
follows:
• Motherboard VGA port information on page 61
• Ethernet port on page 62
60 I/O port specifications
To Next Page
Loading...
