EasyManua.ls Logo

HP Integrity MC990 X - HPE Integrity MC990 X Server Overview; MC990 X Server Chassis; System Components

HP Integrity MC990 X
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HPE Integrity MC990 X Server overview
This chapter provides an overview of the physical and architectural aspects of the HPE Integrity MC990 X
system. The major components of the Integrity MC990 X system are described and illustrated.
The Integrity MC990 X system is an advanced symmetric multiprocessing (SMP) computer system with
multiple Intel processor sockets as a cache-coherent single system image (SSI). Each processor socket
in the system houses multiple compute cores.
In an SMP system, each MC990 X chassis contains memory that it shares with all other processors in the
system. Because the Integrity MC990 X system is modular, it combines the advantages of lower entry-
level cost with global scalability in processors, memory, and I/O. You can install and operate the Integrity
MC990 X system in your lab or server room. One 42U rack holds one or more MC990 X chassis, the rack
management controller (RMC) unit, power distribution units (PDU), and optional mass storage units.
MC990 X server chassis
The basic enclosure within the Integrity MC990 X system is the MC990 X server chassis. The MC990 X
server chassis contains one four-socket motherboard connected to support up to 28 NUMAlink ports,
each with a maximum bidirectional bandwidth communication rate of up to 7.47 GB/sec.
Each MC990 X server chassis has ports that are brought out to external NUMAlink connectors on the
front of the enclosure. The single rack houses up to eight MC990 X server chassis (making up the MC990
X server), an RMC unit, and optional external storage.
Figure 1: MC990 X server chassis on page 6 shows an example of an MC990 X server chassis prior
to mounting in a rack.
The system requires a minimum of one rack with enough PDUs to support as many as eight MC990 X
server chassis, one RMC, and any optional equipment installed in the rack.
You can also add PCIe expansion cards or RAID and non-RAID disk storage to your server system.
1. System drive assembly
2. NUMAlink connectors (28)
Figure 1: MC990 X server chassis
System components
The Integrity MC990 X system includes the following major components:
6 HPE Integrity MC990 X Server overview

Table of Contents

Related product manuals