EasyManua.ls Logo

HP Integrity MC990 X - Regulatory Information; Regulatory Model Numbers

HP Integrity MC990 X
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Figure 25: Slide rail equipment warning
10. If a lithium battery is a soldered part, only qualified service personnel should replace this lithium
battery. For other types, replace it only with the same type or an equivalent type recommended by
the battery manufacturer, or the battery could explode. Discard used batteries according to the
manufacturer’s instructions.
11. Use only the proper type of power supply cord set (provided with the system) for this unit.
12. Do not attempt to move the system alone. Moving a rack requires at least two people.
13. Keep all system cables neatly organized in the cable management system. Loose cables are a
tripping hazard that cause injury or damage the system.
Regulatory information
For important safety, environmental, and regulatory information, see Safety and Compliance Information
for Server, Storage, Power, Networking, and Rack Products, available at http://www.hp.com/support/
Safety-Compliance-EnterpriseProducts.
This product contains a laser that is classified as a Class 1 laser device.
Regulatory Model Numbers
The MC990 X server chassis Regulatory Model Number is: RSVLA-RE01
The RMC chassis Regulatory Model Number is: RSVLA-RE02
Each Regulatory Model Number is marked on the regulatory label which is affixed to each chassis during
the production process. The regulatory labels are placed as near as possible to the power supply AC
inputs.
Regulatory information 69

Table of Contents

Related product manuals