3-40
Using Identity Driven Manager
Configuring User Access
Creating a Global Rule is similar to creating Access Rules for an Access Profile
Group.
To create a global rule:
1. In the navigation tree, click on the realm that will use the global rule, then
click the
Global Rules tab in the Realm’s display.
2. Click the
Add Global Rule button to display the New Global Rule window.
1. Select the Target Properties
• To use the global rule for all users in the realm, select the
All Users
• To use the global rule for a specific user, select Single User and type in
the user name.
• To use the global rule for an access policy group, click
Access Policy
Group
, and select the group from the drop-down menu.
Note: If you want to create a global rule for multiple users or multiple groups,
you do this by creating multiple rules, each referencing a single user, or
group.
2. Set the Access Properties for the Global Rule. This is similar to the process
used to define Access Policy Rules when you create an Access Policy
Group (see page 3-32)
To Next Page
Loading...
Need help?
General