HP J4813A User Manual

3-41
Using Identity Driven Manager
Configuring User Access
a. Select the Location where the global rule will be applied, or "ANY".
b. Select the
Time when the global rule will be used, or "ANY".
c. Select the System where the global rule will be used, or "
ANY"
d. In the Access Profile field, select the access profile where the global
rule will be used.
e. If Endpoint integrity is enabled, select the option that indicates when
the rule will be applied, relative to the endpoint integrity status (
Pass,
Fail, or Any)
3. Click Ok to save your changes and close the
New Global Rule window
4. The new global rule appears in the
Global Rules list.
5. Similar to access rules, the global rules are evaluated in the order they are
listed in the Global Rules table. Use the
Move Up or Move Down button in
the toolbar to arrange the rules in the order you want them to be applied.
IDM checks each rule in the list until a match on all parameters is found,
then applies the matching rule.
Changing Global Rules
To edit Global Rules:
1. Navigate to the Global Rules window.
2. Select the rule you want to modify in the
Rules list.
3. Click the
Edit Global Rule icon to display the Edit Global Rules window.
4. Change the desired values, as explained for New Global Rule (on the
previous page).
5. Click Ok to save the changes and close the
Edit Global Rules window.
To delete a Global Rule:
1. Navigate to the Global Rules window.
2. Select the rule you want to delete in the
Rules list.
3. Click the
Delete Global Rule icon in the toolbar.
4. Click Yes in the confirmation pop-up to complete the process.
The rule is removed from the Global Rules list.

HP J4813A Specifications

General

Brand	HP
Model	J4813A
Category	Software
Language	English