HP J9979A User Manual

7-3
Link Layer Discovery Protocol (LLDP and LLDP-MED)
LLDP Global Configuration
To modify interface settings, select one or more interfaces and click Edit to display the Edit LLDP Interface
page. Or, click Edit All to modify settings on all interfaces.
Receive The LLDP receive mode on the interface. If the receive mode is enabled, the device can
receive LLDPDUs from other devices.
Notify Enable to have LLDP generate a log file entry.
Transmit Management
Information
The status of the LLDP remote data change notification on the interface. When enabled,
the interface sends notifications when a link partner device is added or removed.
Field Description

HP J9979A Specifications

General

Model	J9979A
Category	Switch
Layer	Layer 2
Jumbo Frame Support	Yes
Input Voltage	100 - 240 VAC
Uplink Ports	4
Management	Web, SNMP
Dimensions	44.25 x 30.0 x 4.4 cm
Weight	4.4 kg
Power Supply	Internal
Form Factor	Rack-mountable
Operating Temperature	0°C to 45°C
Operating Humidity	15% to 95% (non-condensing)
Ports	24 x 10/100/1000 ports