17
6. Position the 4G SIM card socket cover and fasten the screws on the cover.
Figure 16 Installing the 4G SIM card socket cover
Installing a Micro SD card
CAUTION:
To avoid damaging the Micro SD card slot, do not use excessive force when you install a Micro
SD card.
Only the JH296A,JH297A,JH298A and JH299A routers support Micro SD cards.
To install a Micro SD card:
1. Remove the screw on the Micro SD card slot cover and take off the cover.
2. Insert the Micro SD card into the Micro SD card slot along the guide rails.
3. Reinstall the cover and fasten the screw on the cover.
Figure 17 Installing a Micro SD card
To Next Page
Loading...
Need help?
General
