Changing the printer separation pad
Normal use with good media causes wear. The use of poor media might require more frequent replacement
of the separation pad. If the printer regularly pulls multiple sheets of media at a time, you might need to
change the separation pad. See
Ordering supplies on page 112 to order a new printer separation pad.
NOTE: Before you change the separation pad, clean the pickup roller. See
Cleaning the pickup roller
on page 46.
1. Turn the printer off, and then unplug the power cord from the printer. Wait for the printer to cool.
2. At the back of the printer, unscrew the two screws holding the separation pad in place.
3. Remove the separation pad.
ENWW Changing the printer separation pad 47
To Next Page
Loading...