Page format is different than on another printer
If you used an older or different printer driver (printer software) to create the document or the printer
properties settings in the software are different, the page format might change when you try to print using
your new printer driver or settings. To help eliminate this problem, try the following:
●
Create documents and print them using the same printer driver (printer software) and printer properties
settings regardless of which HP LaserJet printer you use to print them.
●
Change the resolution, paper size, font settings, and other settings. See
Printer properties (driver)
on page 8 for more information.
Graphics quality
The graphics settings might be unsuitable for your print job. Check the graphic settings, such as resolution, in
the printer properties and adjust them as necessary. See
Printer properties (driver) on page 8 for more
information.
NOTE: Some resolution might be lost when converting from one graphics format to another.
Return to Finding the solution on page 54.
ENWW Printed page is different than what appeared on screen 61
To Next Page
Loading...