Status light patterns
Table 4-1 Light status legend
Symbol for "light off"
Symbol for "light on"
Symbol for "light blinking"
Table 4-2 Control panel light message
Light status State of the printer Action
Ready
The printer is ready to print.
No action is necessary.
Processing data
The printer is receiving or processing data.
Wait for the job to print.
To cancel the current job, press the Cancel
button.
Cleaning mode
A Cleaning page or a Printer Test page is
printing.
Wait until the Cleaning page is finished
printing and the printer is in the Ready
state. This could take up to two minutes.
Wait until the Printer Test page is finished
printing and the printer is in Ready state.
Out of memory
The printer is out of memory.
The page you are printing might be too
complex for the printer's memory capacity.
Try lowering the resolution. See
Understanding print quality settings
on page 16 for more information.
56 Chapter 4 Problem solving ENWW
To Next Page
Loading...