HP M22f User Manual

23
Image appears
blurred,
indistinct, or too
dark.
Brightness is too low. Open the OSD menu and
select Brightness to adjust
the brightness scale as
needed.
Check Video
Cable
is displayed
on screen.
Monitor video cable is disconnected. Connect the appropriate
video signal cable between
the computer and monitor.
Be sure that the computer
power is off while you
connect the video cable.
Input Signal Out
of Range is
displayed on
screen.
Video resolution and/or refresh rate are set higher
than what the monitor supports.
Change the settings to a
supported setting.
The monitor is
off, but it did not
seem to enter
into Sleep mode.
The monitor’s power saving control is disabled. Open the OSD menu and
select Power Control >
Auto-Sleep Mode and set
auto-sleep to On.
On-
Screen Menus
are Locked is
displayed.
The monitor’s OSD lock function is enabled.
Press and hold the Menu
button on the front bezel to
10 seconds to disable the
OSD lockout function.
Power Button is
Locked is
Displayed
The monitor’s power button is locked.
Press and hold the power
button for 10 seconds to
disable the power button
lock function.

HP M22f Specifications

General

Color	silver & black, silver
Screen Type	led
Tiltable	yes
Touch Screen	no
Webcam	no
OS Compatibility	windows, chrome, mac
Screen Size	21.5 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	75hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	5 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	10, 000, 000:1
Synchronization	freesync (amd adaptive sync)
Horizontal Scan Rate	86 kilohertz
HDR	no
Built-In Speakers	no
Interface Connectors	1 x hdmi, 1 x vga
HDMI Ports	1
USB Type B Ports	0
Display Port Inputs	0
Mini Display Port	0
DVI	0
Thunderbolt Ports	0
Headphones Output	no
Voice Assistant	no
Depth with Stand	6.97 inches
Height with Stand	12.51 inches
Width with Stand	19.11 inches
Height without Stand	11.3 inches
Net Weight without Stand	4.85 pounds