Using the PC Hardware 51
Configuring the keyboard buttons
1 Click Start on the taskbar, choose Control
Panel and then click Printers and Other
Hardware, if it is present.
2 Double-click Keyboard.
3 In the Keyboard Properties window that
opens, click the Buttons tab.
4 Double-click the button you want to change.
The button configuration window opens.
5 Choose the button capability from the drop-
down list. Enter the Display label and Address
information. (For a Web site, enter the
complete Web site URL in the Address box.)
6 Click OK.
7 On the Buttons tab, click Apply. Repeat steps
4 through 6 for other buttons.
8 Click OK when you are finished.
Using the Mouse
Your PC may include a wireless or an optical
scrolling mouse.
An optical scrolling mouse uses light and an optical
sensor, instead of a roller ball, to sense movement.
Use the optical mouse on an opaque surface.
A wireless mouse (select models only) is an optical
mouse that uses a receiver/transmitter, instead of a
connector cable, to communicate with your PC. A
light on the receiver indicates receiver activity.
Using the mouse buttons
Like an ordinary mouse, the scrolling mouse has
two buttons on the top: the left button, called the
primary button, and the right button, called the
secondary button.
The mouse has two or three buttons on the top:
■ To position the cursor or to select an item,
click the left mouse button.
■ To display a menu or commands available for
the item you clicked, click the right mouse
button.
■ On select models, use the scroll wheel button
in the center for scrolling and panning.
n
The optical mouse
cannot work on a
glass, translucent,
or reflective surface.
To Next Page
Loading...
