Connecting external antennas
Radio power-level setting example
B-6
7. To the left of dBm, specify the value, 15 in this example. The dialog box should now look
similar to this (in this screenshot the tall dialog box is split in two):
8. Select Save.
Additional information is available as follows:
For APs used in autonomous mode, see the MSM3xx / MSM4xx Access Points
Management and Configuration Guide.
For APs used in controlled mode, see Working with controlled APs in the
MSM7xx Controllers Management and Configuration Guide.
Documentation is available online from: www.hp.com/networking/support. For Product
Brand, select ProCurve.
To Next Page
Loading...
