EasyManuals Logo

HP OMEN 25 Maintenance And Service Guide

HP OMEN 25
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
9
4 Removal and replacement procedures
Adherence to these procedures and precautions is essential for proper service.
Preparation for disassembly
Use this information to properly prepare to disassemble and reassemble the monitor.
1) Read the “Important safety information” and “Important service information and precautions” sections in
the “Getting started” chapter of this guide.
2) Clean the room for disassembly.
3) Identify the disassembly area.
4) Check the position that the monitors are to be placed along with the number of monitors. Prepare the area
for material flow according to the disassembly layout.
5) Be sure to have the following equipment and materials:
Press fixture
Working table
Screwdriver
Knife
Gloves
Cleaning cloth
ESD protection
Scraper bar in the following dimensions:
RC
Before removing the RC, follow these steps:
Prepare the monitor for disassembly. See Preparation for disassembly on page 9.
Remove the RC:

Other manuals for HP OMEN 25

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP OMEN 25 and is the answer not in the manual?

HP OMEN 25 Specifications

General IconGeneral
3DNo
Panel typeTN
Pixel pitch0.283 x 0.283 mm
Screen shapeFlat
Display diagonal24.5 \
Display technologyLED
Native aspect ratio16:9
Viewable size, vertical302.6 mm
Contrast ratio (typical)1000:1
Display number of colors16.78 million colors
Viewable size, horizontal543.7 mm
Display brightness (typical)400 cd/m²
Supported graphics resolutions640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1440 x 900 (WXGA+), 1600 x 900, 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080)
CertificationCE; ICES; VCCI; FCC; C-Tick; CB; TUV-GS; ISO-9241-307; cTUVus; TUV LBL; CCC; CEL; BSMI; KCC; Australia MEPS; E-standby; PSB; ISC; Microsoft WHQL Certification (Windows 10, Windows 8.1 and Windows 7); SmartWay Transport Partnership - NA only
Product colorBlack
Country of originChina
Market positioningGaming
VESA mounting-
Tilt angle range-5 - 23 °
USB hub version3.2 Gen 1 (3.1 Gen 1)
VGA (D-Sub) ports quantity0
USB Type-A downstream ports quantity3
HP segmentHome
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Energy efficiency scaleA to G
Power consumption (max)40 W
Annual energy consumption35.3 kWh
Power consumption (standby)0.5 W
Power consumption (typical)30 W
Sustainability certificatesENERGY STAR
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 70 %
Cables includedAC, HDMI, DisplayPort, USB
Harmonized System (HS) code85285210
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)227.5 mm
Width (with stand)569 mm
Height (with stand)407.9 mm
Weight (with stand)4600 g
Depth (without stand)62.8 mm
Height (without stand)346.2 mm
Weight (without stand)3550 g

Related product manuals