HP OMEN 32q User Manual

16
HDMI 1 connector CN501
Repair the HDMI connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Use a hot air gun to melt the solder on the pins.
3) Lift the HDMI 1 connector from the circuit board
4) Place the new component on the circuit board. Be sure that it matches the footprint.
5) Solder the new component.
HDMI 2 connector CN502
Repair the HDMI connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Use a hot air gun to melt the solder on the pins.

HP OMEN 32q Specifications

General

Resolution	2560 x 1440 (QHD)
Aspect Ratio	16:9
VESA Mount	100 x 100 mm
Connectivity	HDMI 2.0
Viewing Angle	178°
AMD FreeSync	AMD FreeSync Premium Pro