HP P6000 Installation Guide

Figure 20 P6000 iSCSI module management ports and P6000 fabrics
4. iSCSI fabric B1. Fibre Channel fabric A
5. RS232 management ports2. Fibre Channel fabric B
6. Telnet management ports3. iSCSI fabric A
Figure 21 iSCSI/FCoE module management ports and P6000 fabrics
4. iSCSI/FCoE fabric B1. Fibre Channel fabric A
5. RS232 management ports2. Fibre Channel fabric B
6. Telnet management ports3. iSCSI/FCoE fabric A
The following is an example of using the CLI to configure the telnet management port with a static
IPv4 address:
CLI example of: login
set mgmt
show mgmt
help
Configuring the iSCSI and iSCSI/FCoE module management ports 35

HP P6000 Specifications

General

RAID Levels Supported	0, 1, 5, 6, 10
Form Factor	Rack-mountable
Hard Drive Form Factor	2.5", 3.5"
Drive Types Supported	SAS, SSD, SATA
Redundancy	Redundant power supplies
Host Connectivity	Fibre Channel, iSCSI
Operating Temperature	10° to 35°C (50° to 95°F)