HP P6000 Installation Guide

3. Connect the controller enclosure to I/O module B (red ports) on the top and bottom disk
enclosures. This cabling represents the second redundant path (P1 on I/O module B of the
top disk enclosure and P2 on I/O module B of the bottom disk enclosure).
Figure 49 Cabling the second redundant path
60 Cabling the P6300/P6500 EVA

HP P6000 Specifications

General

RAID Levels Supported	0, 1, 5, 6, 10
Form Factor	Rack-mountable
Hard Drive Form Factor	2.5", 3.5"
Drive Types Supported	SAS, SSD, SATA
Redundancy	Redundant power supplies
Host Connectivity	Fibre Channel, iSCSI
Operating Temperature	10° to 35°C (50° to 95°F)