Service door
Description Spare part number
Service door is available with the Plastics Kit
Aqua blue finish 767272-001
Natural silver finish 767273-001
Snow white finish 767258-001
Vibrant red finish 767274-001
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 29).
Remove the service door:
1. Using a small Phillips screwdriver, loosen the two service door captive screws (1).
2. Lift the door (2).
3. Slide the service door forward to remove.
30 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts