Top cover
NOTE: The top cover spare part kit includes the keyboard and cable.
Description Spare part number
Black finish 767263-001
White finish 767264-001
IMPORTANT: Make special note of each screw and screw lock size and location during removal
and replacement
Before removing the top cover, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 29), and then remove the following components:
a. Service door (see
Service door on page 30)
b. Optical drive (see
Optical drive on page 32)
Remove the top cover:
1. Close the display and turn the computer upside down.
2. Pry the feet up to remove the adhesive that secures them to the computer.
Component replacement procedures 39