Solving Problems with Your Computer
Troubleshooting Techniques
112 Reference Guide
= If another battery is available, try it.
= If another AC adapter is available, try it.
If the Time Remaining percentage for the battery is not correct
= The Time Remaining value on the power (battery) icon is an estimate based on your
current usage, not a precise value.
If the computer stops responding
= Press Ctrl+Alt+Del to end the application that is not responding.
= Slide the power switch to the left, hold it for at least five seconds, and release it to turn
off the computer. Then slide the power switch again to turn the computer back on.
= If nothing happens, insert a paper clip into the system-off button on the left side of the
computer. Then slide the power switch to turn the computer on.
If the computer doesn’t standby as expected
= If you have a connection to another computer, the computer doesn’t standby if the
connection is actively in use.
= If the computer is performing an operation, it normally waits for the operation to
finish.
You may also want to test the power management system with diagnostics. See “Testing
Hardware Operation.”
Printing problems
For most printing problems, use the Print Troubleshooter in Windows Help and Support.
If a serial or parallel printer doesn’t print
= Check that you are using a proper cable or cable adapter, and that the printer is on.
= Check for paper in the printer or other printer errors.
= Make sure the printer cable is securely attached at both ends.
To Next Page
Loading...
Need help?
General