Specifications and Regulatory Information
Hardware and Software Specifications
128 Reference Guide
Base I/O address When IR port is enabled, sets the I/O
address and interrupt.
2F8 IRQ3
DMA channel When FIR mode is enabled, sets the
DMA channel.
DMA 0
Parallel Port Sets how the parallel port is
configured—by the user (Enabled),
automatically (Auto), or inactive
(Disabled).
Enabled
Mode When parallel port is enabled, sets the
port to Normal, Bi-directional, ECP, or
EPP mode.
ECP
Base I/O address When EPP mode is not enabled, sets
the I/O address.
378h
Interrupt Sets the interrupt. IRQ 7
DMA channel When ECP mode is enabled, sets the
DMA channel.
DMA 3
LCD Status Panel
Display
Enables or disables display of the
status panel.
Enabled
LCD Status Panel
Date Format
Set date format on the status panel. mm/dd/yy
(month/date/year)
LCD Status Panel
Time Format
Set time format on the status panel. hh:mm am/pm
Security Menu Default
User Password Is Shows if a user password is set. Clear
Supervisor Password
Is
Shows if a supervisor password is set. Clear
Set User Password Sets, changes, or clears user
password, after supervisor password
is set. Password length can be no
longer than 8 characters, 0-9, A-Z.
Set Supervisor
Password
Sets, changes, or clears supervisor
password. This password protects
BIOS Setup settings.
To Next Page
Loading...
