18 PC Basics Guide
3 Gently place the disc in the tray with the label facing up.
NOTE: On a double-sided DVD, read the text around the centre hole to
determine which side (A versus B or Standard versus Widescreen) to play.
Place the disc in the tray, with the label facing up for the side you want to play.
4 Close the disc tray by:
• Gently pushing the tray into the PC.
Or
• Clicking the open/close button on the control panel for the program that
controls the drive.
Or
• Pressing the media control open/close button or Eject button on the
keyboard (select models only).
Or
• Pressing the Eject button on the drive, if it is accessible.
To remove a CD or DVD:
1 With the PC turned on, open the disc tray by pressing the Eject button.
2 Holding on to the disc edges or centre hole only, lift the CD or DVD out of
the tray.
3 Place the disc in its case.
4 Close the disc tray by gently pushing the tray into the PC.
To Next Page
Loading...
Need help?
General