Battery cable
You do not have to remove the internal battery before removing several internal components. However, if
you leave the battery installed while removing components, be sure to disconnect the battery cable to
remove power from internal components.
Before disconnecting the battery cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
Releasing the tablet from the keyboard dock
on page 25).
5. Remove the dock bottom cover (see
Dock bottom cover on page 26).
Disconnect the battery cable:
▲
Disconnect the battery cable from the system board connector.
28 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
