HDMI board
Description Spare part number
HDMI board 765929-001
Before removing the HDMI board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
Releasing the tablet from the keyboard dock
on page 25).
5. Remove the dock bottom cover (see
Dock bottom cover on page 26).
6. Disconnect the battery cable (see
Battery cable on page 28).
To remove the HDMI board:
1. Remove the tape from atop the connector (1).
2. Disconnect the cable (2) from the board.
3. Remove the two Phillips PM2.0×3.0 screws (3) that secure the HDMI board to the dock.
4. Lift the board to remove it from the dock (4). Note the posts (5) that hold the board in place.
Reverse this procedure to install the HDMI board.
Keyboard dock components 29
To Next Page
Loading...
