Battery
Description Spare part number
2-cell, 30-WHr, 4.15-AH battery 756416-001
The tablet includes an internal battery.
Before removing the battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
Releasing the tablet from the keyboard dock
on page 25).
5. Remove the tablet cover (see
Tablet cover on page 43).
6. Disconnect the docking cable and touch cable (see
Cables, docking and touch on page 46).
7. Disconnect the battery cable (see
Battery cable on page 45).
1. Remove the eight Phillips PM2.0×3.0 screws (1) that secure the battery to the tablet.
2. Remove the battery (2) from the tablet.
Reverse this procedure to install the battery.
Tablet components 63
To Next Page
Loading...
