Battery
Description Spare part number
2-cell, 21-WHr, 2.96-AH battery not spared
Before removing the battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
Releasing the tablet from the keyboard dock
on page 25).
5. Remove the dock bottom cover (see
Dock bottom cover on page 26).
6. Disconnect the battery cable (see
Battery cable on page 28).
Remove the battery:
1. Remove the four Phillips PM2.0×3.0 screws (1) that secure the battery to the dock.
2. Lift the battery (2) from the dock.
Reverse this procedure to install the battery.
Keyboard dock components 39
To Next Page
Loading...
