Volume board
Description Spare part number
Volume board (includes cable) 765990-001
Before removing the volume board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
Releasing the tablet from the keyboard dock
on page 25).
5. Remove the tablet cover (see
Tablet cover on page 43).
6. Disconnect the battery cable (see
Battery cable on page 45).
To remove the volume board:
1. Disconnect the volume board cable from the system board (1).
2. Remove the Phillips PM2.0×3.0 screw (2) that secures the board to the tablet.
3. Lift the volume board from the tablet (3). You have to pull the board out from under the tab (4) built
into the tablet.
Reverse this procedure to install the volume board.
52 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
