Power
Hardware and Software Guide 2–17
Battery Packs
Inserting or Removing a Battery Pack
Ä
CAUTION: To prevent loss of work when removing a battery pack that
is the only power source, shut down the notebook or initiate hibernation
before removing the battery pack. (If you initiate hibernation, do not
begin battery pack removal until the power/standby lights are turned
off, indicating that hibernation is complete.)
Inserting a Battery Pack
Although battery packs vary by model, the insertion procedure is
the same for all supported battery packs.
To insert a battery pack:
1. Turn the notebook upside down.
2. Slide the battery pack into the battery bay 1.
3. Pivot the battery pack downward until it is seated 2.
To Next Page
Loading...
Need help?
General