Keyboard
Hardware and Software Guide 3–7
Switching Displays (fn+f4)
The fn+f4 hotkey switches the image among display devices
connected to the system. For example, if an optional monitor
is connected to the notebook through the external monitor port,
each time you press the
fn+f4 hotkey the image will switch among
the notebook display, the monitor display, and a simultaneous
display on both the notebook and the monitor.
Most monitors receive video information from the notebook
using the external VGA video standard. The
fn+f4 hotkey can also
toggle images among other devices receiving video information
from the notebook.
The following video transmission types, with examples of devices
that use them, are supported by the
fn+f4 hotkey:
■ LCD (notebook display)
■ External VGA (most monitors)
■ S-Video (televisions, camcorders, VCRs, and video capture
boards with S-Video-in jacks)
■ Composite video (televisions, camcorders, VCRs, and video
capture boards with composite video-in jacks)
✎
Composite video devices can be connected to the system only
by using an optional expansion product.
To Next Page
Loading...
Need help?
General